Reference : P2001B - P2002 - P2003 - P2004
Made of special «high resistance» steel and galvanised inside and out, Indelec’s elevation poles allow the lightning rod to be raised by up to 6 m without resorting to guy wires.
Reference : P2015 - P2016 - P2017
Made of stainless steel , Indelec’s elevation poles allow the lightning rod to be raised by up to 5m without resorting to guy wires.
Reference : P3082 - P3083
This kit provides all the necessary parts for attaching guy wires to an Indelec 4-section pole.
Reference : P3081
The pivoting base allows a guy-wire-supported pole to be fixed to a ridge beam.
Reference : P3066 - P3067 - P3068
Used to fix a lightning rod on a tubular or square intersection. The sleeve is held in place by 3 press screws.
Reference : P3062 - P3063 - P3065
To ensure the roof stays watertight when installing a pole: Rubber collar clamped around the pole and/or Zinc collar welded to the pole.
Reference : C3678
Used to fix a pole on to a flat roof without the need of guy wires. The Tripod is fixed on roof (up to 10° slope) using concrete blocks without drilling.
Reference : P3052 - P3053
Used to fix a pole on to a flat roof without the need of guy wires. The flat roof roof should be drilled, the holes plugged and the mounting stand then firmly attached with 4 bolts. It can also be fixed on flooring tiles for mounting stand that are laying on the flat roof without drilling.
Reference : P3042
For lightning rod or elevation pole (2m height max) fixing on a wooden or concrete frame.
Reference : C1931
For close offset fixing of a pole to any vertical tubular support (e.g. pole, railings etc.).
Reference : P3034
Used to fix a pole against a vertical or horizontal tubular support.
Reference : C1928 - C1929
Used to fix a pole on any vertical tubular support (e.g. pole, railings etc.). 2 models with different offsets are available.
Reference : C213 - P3024
For the strapping of a pole to a domestic chimney. - Dichromate steel brackets. - Galvanised steel strapping.
Reference : C1926 - C1927
Used to fix a pole on a vertical surface. 2 fixing screw lengths are available.