p2

Galvanized Steel Elevation Mast

Reference : P2001B - P2002 - P2003 - P2004

Made of special «high resistance» steel and galvanised inside and out, Indelec’s elevation poles allow the lightning rod to be raised by up to 6 m without resorting to guy wires.

p2

Stainless Steel Elevation Mast

Reference : P2015 - P2016 - P2017

Made of stainless steel , Indelec’s elevation poles allow the lightning rod to be raised by up to 5m without resorting to guy wires.

p2

Steel Guy Wire Kits

Reference : P3082 - P3083

This kit provides all the necessary parts for attaching guy wires to an Indelec 4-section pole.

p2

Pivoting Base

Reference : P3081

The pivoting base allows a guy-wire-supported pole to be fixed to a ridge beam.

p2

Adapter Sleeve

Reference : P3066 - P3067 - P3068

Used to fix a lightning rod on a tubular or square intersection. The sleeve is held in place by 3 press screws.

p2

Waterproofing Collar

Reference : P3062 - P3063 - P3065

To ensure the roof stays watertight when installing a pole: Rubber collar clamped around the pole and/or Zinc collar welded to the pole.

p2

Mast Self-Standing Tripod Base

Reference : C3678

Used to fix a pole on to a flat roof without the need of guy wires. The Tripod is fixed on roof (up to 10° slope) using concrete blocks without drilling.

p2

Mounting Stand for Mast

Reference : P3052 - P3053

Used to fix a pole on to a flat roof without the need of guy wires. The flat roof roof should be drilled, the holes plugged and the mounting stand then firmly attached with 4 bolts. It can also be fixed on flooring tiles for mounting stand that are laying on the flat roof without drilling.

p2

Anchor or cement mountings

Reference : P3042

For lightning rod or elevation pole (2m height max) fixing on a wooden or concrete frame.

p2

Offset collars

Reference : C1931

For close offset fixing of a pole to any vertical tubular support (e.g. pole, railings etc.).

p2

Multipurpose Fixing Bracket

Reference : P3034

Used to fix a pole against a vertical or horizontal tubular support.

p2

Offset mounting brackets

Reference : C1928 - C1929

Used to fix a pole on any vertical tubular support (e.g. pole, railings etc.). 2 models with different offsets are available.

p2

Hoop Mounting

Reference : C213 - P3024

For the strapping of a pole to a domestic chimney. - Dichromate steel brackets. - Galvanised steel strapping.

p2

Wall Mounting Brackets

Reference : C1926 - C1927

Used to fix a pole on a vertical surface. 2 fixing screw lengths are available.

p2

Side Mounting Bolted Brackets

Reference : C1922 - C1923

Used to fix an offset pole on a vertical surface. The bracket is held in place by 2 cast iron plugs mast.